RDS does not work.*
•Make sure that you are tuned to an FM RDS station.
•Select a stronger FM station.
The RDS information that you want does not appear.*
•Contact the radio station and find out whether they actually provide the service in question. If so, the service may be temporarily out of order.
*Models of area code CEL, CEK, ECE only.
HDMIThe source sound input to the HDMI jack is not output from the receiver or the TV speaker.
•Check the HDMI connection (page 71).
•You cannot listen to the Super Audio CD by connecting HDMI.
•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.
•Be sure to use a connecting cable for the HDMI jack corresponding to high speed (an HDMI version 1.3, category 2 cable) when you view images or listen to sound during a Deep Color transmission.
The source image input to the HDMI jack is not output from the TV.
•Check the HDMI connection (page 71).
•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.
•Be sure to use a connecting cable for the HDMI jack corresponding to high speed (an HDMI version 1.3, category 2 cable) when you view images or listen to sound during a Deep Color transmission.
The Control for HDMI function does not work.
•Check the HDMI connection (page 71).
•Make sure “CTRL:HDMI” is set to “CTRL ON” in the HDMI menu.
•Make sure the connected component is compatible with the Control for HDMI function.
•Check the Control for HDMI settings on the connected component. Refer to the operating instructions of the connected component.
•Repeat the procedures of “Preparing Control for HDMI function” if you change the HDMI connection, connect/disconnect the AC power cord, or when there is a power failure (page 72).
No sound is output from the receiver and TV speaker while using the System Audio Control function.
• Make sure the TV is compatible with the |
| ||
System Audio Control function. |
| ||
• If the TV does not have System Audio |
| ||
Control function, set the “AUDIO OUT” |
| ||
settings in HDMI menu to |
| ||
– “TV+AMP” if you want to listen to the |
| ||
sound from the TV speaker and |
| ||
receiver. |
| ||
– “AMP” if you want to listen to the |
| ||
sound from the receiver. |
| ||
• If you cannot listen to the sound of a |
| ||
| |||
component connected to the receiver |
| ||
– Change the input of the receiver to | Additional | ||
HDMI when you want to watch a | |||
| |||
program on a component connected via |
| ||
HDMI connection to the receiver. |
| ||
– Change the TV channel when you want | Information | ||
to watch a TV broadcast. | |||
| |||
– Select the component or input you want |
| ||
to watch when you watch a program on |
| ||
the component connected to the TV. |
| ||
Refer to the operating instructions of the |
| ||
TV on this operation. |
| ||
|
|
| |
continued
95GB