Adjusting the equalizer

(EQ menu)

You can use the EQ menu to adjust the tonal quality (bass/treble level) of the front speakers.

Select “EQ” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 42) and “Overview of the menus” (page 43).

Settings for the tuner

(TUNER menu)

You can use the TUNER menu to set the FM station receiving mode and name preset stations.

Select “TUNER” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 42) and “Overview of the menus” (page 43).

EQ menu parameters

xBASS (Front speakers bass level)*

xTREBLE (Front speakers treble

level)*

*You can also adjust the front speaker bass and treble level with TONE MODE and TONE +/– on the receiver (page 7).

Note

This function does not work in the following cases.

Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received.

PCM signals with a sampling frequency of more than 96 kHz are being received.

52GB

TUNER menu parameters

xFM MODE (FM station receiving mode)

STEREO

This receiver will decode the signal as stereo signal when the radio station is broadcast in stereo.

MONO

This receiver will decode the signal as mono signal regardless of the broadcast signal.

xNAME IN (Naming preset stations)

Lets you set the name of preset stations. For details, see “Naming preset stations” (page 67).