1 | 2 |
| 3 4 | 5 |
|
| 6 | 7 |
|
| 8 | 9 | 0 | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ws | wa | w; | ql | qk qj | qhqg qf | qd | qs qa |
Name | Function |
ASW | Lights up when the audio signal |
| is output from the |
| SUBWOOFER jacks. |
|
|
BLFE | Lights up when the disc being |
| played back contains an LFE |
| (Low Frequency Effect) |
| channel and the LFE channel |
| signal is actually being |
| reproduced. |
|
|
CCOAX | Lights up when INPUT MODE |
| is set to “AUTO” and the source |
| signal is a digital signal being |
| input through the COAXIAL |
| jack (page 75). |
|
|
DOPT | Lights up when INPUT MODE |
| is set to “AUTO” and the source |
| signal is a digital signal being |
| input through the OPTICAL |
| jack (page 75). |
Name Function
FNeural - THX Lights up when the receiver applies Neural - THX processing to input signals.
GDTS/ | “DTS” lights up when the |
receiver is decoding DTS | |
DTS 96/24 | signals. |
| |
| receiver is decoding |
| signals. |
| “DTS 96/24” lights up when the |
| receiver is decoding DTS |
| 96 kHz/24 bit signals. |
| Note |
| When playing a DTS format |
| disc, be sure that you have made |
| digital connections and that |
| INPUT MODE is set to |
| “AUTO” (page 75). |
HD.RANGE | Lights up when dynamic range |
| compression is activated (page |
E ; D/
;D EX/
;D+/
;TrueHD
“; D” lights up when the receiver is decoding Dolby Digital signals.
“; D EX” lights up when the receiver is decoding Dolby Digital Surround EX signals. “; D+” lights up when the receiver is decoding Dolby Digital Plus signals.
“; TrueHD” lights up when the receiver is decoding Dolby TrueHD signals.
Note
When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is set to “AUTO” (page 75).
48). |
ISP A/SP B/ Lights up according to the
SP A+B speaker system used (page 30). However, these indicators do not light up if the speaker output is turned off or if headphones are connected.
JSLEEP | Lights up when the sleep timer |
| is activated (page 81). |
|
|
KTuner | Lights up when using the |
indicators | receiver to tune in radio stations |
| (page 63), etc. |
| Note |
| “RDS” appears for models of |
| area code CEL, CEK, ECE |
| only. |
|
|
8GB