MONITOR CTRL S IN hookup (for USA and
Canadian models only)
If have a Sony TV monitor equipped with a CTRL S OUT jack
Use a CONTROL S cord (not supplied) to connect the CTRL S OUT jack on the monitor to the MONITOR CTRL S IN jack on the control amplifier. This allows you to turn on your Sony TV monitor automatically when you turn on the control amplifier using the supplied remote control.
Refer to the operating instructions supplied with you Sony TV monitor for details.
Connecting the AC power cord
Before connecting the AC power cord of this control amplifier to a wall outlet:
•Turn the MASTER VOLUME control to the leftmost position (0).
Connect the AC power cord(s) of your audio/video components to wall outlet(s).
If you connect other audio/video components to the AC OUTLET(s) on the control amplifier, the control amplifier will supply power to the connected component(s), allowing you to turn the whole system on or off when you turn the control amplifier on/off.
Caution
Make sure that the total power consumption of the component(s) connected to the control amplifier’s AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect
Components the Up Hooking