Before Using the Control Amplifier
Before turning on the control amplifier
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
Clearing the control amplifier’s memory
Before you use your control amplifier for the first time or when you want to clear the control amplifier’s memory, do the following.
MAIN MENU
|
|
|
|
|
|
| MASTER VOLUME |
|
|
|
|
|
|
| 5 |
|
|
|
|
|
| 4 | 6 |
STANDBY |
|
|
|
|
|
|
|
| VIDEO 1 VIDEO 2 VIDEO 3 LD | DVD | TV | TAPE MD/DAT CD | TUNER PHONO | 3 | 7 |
U |
|
|
|
|
|
|
|
MAIN MENU |
|
|
|
|
| DIGITAL/ANALOG |
|
|
|
|
|
|
| 2 | 8 |
MENU | + / – |
|
|
|
| INPUT SELECTOR |
|
|
|
|
|
|
| 1 | 9 |
g |
|
|
|
|
|
|
|
| SP SET UP EQ | SURR | LEVEL CUSTOM |
| 0 | 10 | |
PHONES |
|
|
|
|
|
|
|
| EQUALIZER BANK AUTO FORMAT | MODE | 2ch | AUDIO SPLIT |
|
| |
–+
MENU
+/–
1Press MAIN MENU repeatedly to display “<CUSTOMIZE>”.
2Turn MENU to display “MEMORY CLEAR [NO]”.
3Turn +/– to display “MEMORY CLEAR [YES]”.
After a few seconds, “Are you sure?” is displayed. Turn +/– to display [YES] again and wait a few seconds. The unit automatically turns off, and then turns on again. All of the followings are reset to the factory settings or cleared.
•All menu adjustments (speaker settings, equalizer settings, sound field parameters, etc.).
•The equalizer settings in the equalizer bank.
Checking the connections
After connecting all of your components to the control amplifier, do the following to verify that the connections were made correctly.
U |
|
|
|
| MASTER VOLUME | |
|
|
|
|
|
| |
|
|
| INPUT SELECTOR |
| ||
|
|
|
|
|
| MASTER VOLUME |
|
|
|
|
|
| 5 |
|
|
|
|
| 4 | 6 |
STANDBY |
|
|
|
|
|
|
| VIDEO 1 VIDEO 2 VIDEO 3 LD DVD | TV | TAPE MD/DAT | CD TUNER PHONO | 3 | 7 |
U |
|
|
|
|
|
|
MAIN MENU |
|
|
|
| DIGITAL/ANALOG |
|
|
|
|
|
| 2 | 8 |
MENU | + / – |
|
|
| INPUT SELECTOR |
|
|
|
|
|
| 1 | 9 |
g |
|
|
|
|
|
|
| SP SET UP EQ | SURR | LEVEL CUSTOM |
| 0 | 10 |
PHONES |
|
|
|
|
|
|
| EQUALIZER BANK AUTO FORMAT | MODE | 2ch | AUDIO SPLIT |
|
|
–+
1Press Uto turn on the control amplifier.
2Turn INPUT SELECTOR to select a component (program source) that you connected (e.g., CD player or tape deck).
3Turn on the component and start playing it.
4Turn MASTER VOLUME to increase the volume.
If you do not obtain normal sound output after performing this procedure, look for the reason in the following checklist and take the appropriate measures to correct the problem.
There is no sound no matter which component is selected.
/Check that the control amplifier, the power amplifier(s), and all components are turned on.
/Check that the MASTER VOLUME control is not set to 0.
/If “MUTING” appears in the display, press MUTING on the remote to turn off the muting function.
There’s no sound from a specific component.
/Check that the component is connected correctly to the audio input jacks for that component.
/Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the control amplifier and the component.
If you encounter a problem that is not included above, see “Troubleshooting” on page 43.
Sound Surround Enjoying