Information Additional

Troubleshooting

No sound or only a very low-level sound is heard from the rear speakers.

/Make sure the sound field function is on (press

AUTO FORMAT).

/Adjust the speaker volume (see page 22).

/Make sure the rear speaker size parameter is set to either SMALL or LARGE (see page 18).

Recording cannot be done.

/Check that the components are connected correctly.

/Select the source component by rotating the INPUT SELECTOR control.

/When recording from a digital component, be sure to press DIGITAL/ANALOG to select “ANALOG” (see page 13) before recording with a component connected to the analog MD/DAT, TAPE, VIDEO 1, VIDEO 2, or VIDEO 3 terminals.

/When recording from a digital component, be sure to press DIGITAL/ANALOG to select “DIGITAL” (see page 13) before recording with the component connected to the MD/DAT OPTICAL OUT terminals.

The surround effect cannot be obtained.

/Make sure the sound field function is on (press

AUTO FORMAT).

No picture or an unclear picture appears on the TV screen or monitor.

/Select the appropriate function on the control amplifier.

/Set your TV to the appropriate input mode.

/Move your TV away from the audio components.

The audio output does not correspond to the video image on the TV screen or monitor.

/Check the source of the audio signal by pressing AUDIO SPLIT to display "V:(video component) A:(audio component)". Hold down AUDIO SPLIT for more than 2 seconds to cancel the function and restore both audio and video to the selected video component.

The remote does not function.

/Point the remote at the remote sensor gon the control amplifier.

/Remove any obstacles in the path between the remote and the control amplifier.

/Replace all batteries in the remote with new ones, if they are weak.

/Make sure you select the correct function on the remote.

/If the remote is set to operate the TV only, use the remote to select a source or component other than TV before operating the control amplifier or other component.

Reference sections for clearing the control

amplifier’s memory

To clear

See

All memorized settings

Page 17

 

 

Customized equalizers

Page 40

 

 

44GB