Adjustments and Settings
Adjusting the Speaker Settings <SP SETUP>
See
pFront speaker size (FRONT SP)
Initial setting : LARGE
pCenter speaker size (CENTER SP)
Initial setting : LARGE
pRear speaker size (REAR SP)
Initial setting : LARGE
pSub woofer selection (SUB WOOFER)
Initial setting : YES
pFront speaker distance (FRONT)
Initial setting : 5.0 meter
pCenter speaker distance (CENTER)
Initial setting : 5.0 meter
pRear speaker distance (REAR)
Initial setting : 3.5 meter
pSub woofer distance (S.W)
Initial setting : 5.0 meter
pSub woofer phase polarity (S.W PHASE)
Initial setting : NORMAL
pRear speaker position (REAR POSI.)
Initial setting : BEHIND
pRear speaker height (REAR HIGHT)
Initial setting : LOW
pFront speaker roll off frequency (FRONT)
Initial setting : > 120 Hz
pCenter speaker roll off frequency (CENTER)
Initial setting : > 120 Hz
pRear speaker roll off frequency (REAR)
Initial setting : > 120 Hz
pDistance unit (DIST. UNIT)
Initial setting : METER
Adjusting the Equalization
<EQUALIZER>
The EQUALIZER menu lets you adjust the equalization (low, mid, and high frequencies) of the front, center, and rear speakers individually. The equalizer bank lets you store up to 5 different equalizer settings.
The following menu is only available after pressing EQUALIZER BANK and selecting one of the equalizers (EQ PRESET 1~5).
pFront speaker bass adjustment (Level/ Frequency)
FRONT BASS +XX.XdB
FRONT BASS XXXHz
1Turn MENU to select the level (dB) or frequency (Hz).
2 Turn +/– to adjust.
Repeat until you achieve the sound you desire.
BASS | MID | TREBLE |
Level |
| Band- |
(dB) |
| width |
Frequency | Frequency | Frequency |
(Hz) | (Hz) | (Hz) |
•The level can be adjusted ±10 dB in 0.5 dB steps.
•The frequency can be adjusted from 99 Hz to 1 kHz in 21 steps.
pFront speaker midrange adjustment (Level/ Frequency)
FRONT MID +XX.XdB
FRONT MID XXXHz
Adjust as described in “Front speaker bass adjustment”.
•The level can be adjusted ±10 dB in 0.5 dB steps.
•The frequency can be adjusted from 198 Hz to 10 kHz in 37 steps.
pFront speaker midrange bandwidth
FRONT MID [WIDE]
This parameter lets you adjust the width of the midrange band.
•“WIDE” provides a wide band centered on the selected frequency, for general adjustments.
•“MIDDLE” provides a normal band.
•“NARROW” provides a narrow band centered on the selected frequency, for specific adjustments.