pRear speaker height*
REAR HIGHT [LOW]
Initial setting : LOW
This parameter lets you specify the height of your rear speakers for proper implementation of the Digital Cinema Sound “VIRTUAL” sound fields. Refer to the illustration below.
•Select “LOW” if the location of your rear speakers corresponds to section A.
•Select “HIGH” if the location of your rear speakers
corresponds to section B.
This setting only effects the “VIRTUAL” sound fields.
B | B |
| 60 |
A | A |
| 30 |
*This parameter is not available when “Rear speaker size“ is set to “NO”.
zAbout the rear speaker position and rear speaker height
These settings are designed specifically for implementation of the Digital Cinema Sound “VIRTUAL” sound fields.
The rear speaker position parameter allows you to specify one of three possible horizontal positions. The rear speaker height parameter allows you to specify one of two possible height positions. Select the position and height combination that comes closest to the actual position of your rear speakers.
pFront speaker roll off frequency
FRONT SP > XXXHz
Initial setting : > 80 Hz
This setting lets you select the roll off frequency for the low cut filter of the front (left and right) speakers.
•The bass frequencies lower than the cut off frequency are divided by the bass redirection circuitry and output from the sub woofer or other “LARGE” speakers. In order to prevent clipping, frequencies below the cut off frequency are not output from the front speakers.
pCenter speaker roll off frequency
CENTER SP > XXXHz
Initial setting : > 80 Hz
This setting lets you select the roll off frequency for the low cut filter of the center speaker.
•The bass frequencies lower than the cut off frequency are divided by the bass redirection circuitry and output from the sub woofer or other “LARGE” speakers. In order to prevent clipping, frequencies below the cut off frequency are not output from the center speaker.
Sound Surround Enjoying