Operations Other
Creating Custom Equalizer Settings
Any changes you make to the preset equalizers (EQ PRESET 1~5) are stored automatically.
1Press EQUALIZER BANK repeatedly to select the equalizer you want to adjust (EQ PRESET 1~5).
2Press MAIN MENU repeatedly to display “<EQUALIZER>”.
3Turn MENU to select the desired parameter, then turn +/– to adjust.
These parameters let you adjust the sound of each speaker individually (see page 32).
The adjustments are stored automatically.
zYou can turn off the equalization without erasing the equalizer
Press the EQUALIZER BANK repeatedly to select “EQUALIZER OFF”.
Clearing Stored Equalizer Settings
1Press EQUALIZER BANK repeatedly to select the equalizer you want to clear (EQ PRESET
2Press MAIN MENU repeatedly to display “<EQUALIZER>”.
3Turn MENU to display “<PRESET x clear [NO]>” ("x" is the number of the current equalizer preset).
4Turn +/– to display “<PRESET x clear [YES]>”.
A few seconds later, "Are you sure?" is displayed.
5Once again, turn +/– to display “[YES]”.
A few seconds later, "PRESET x CLEARED !" is displayed and the contents of the selected equalizer bank are restored to the factory presets.
Recording
Your control amplifier makes it easy to record to and from the components connected to it. You don’t have to connect the playback and recording components directly to each other: once you select a program source on the control amplifier, you can record and edit as you normally would using the controls on each component.
Before you begin, make sure you’ve connected all components properly.
INPUT SELECTOR
|
| AUDIO SPLIT |
|
| |||
|
|
|
|
|
|
| MASTER VOLUME |
|
|
|
|
|
|
| 5 |
|
|
|
|
|
| 4 | 6 |
STANDBY |
|
|
|
|
|
|
|
| VIDEO 1 VIDEO 2 VIDEO 3 LD | DVD | TV | TAPE MD/DAT CD | TUNER PHONO | 3 | 7 |
U |
|
|
|
|
|
|
|
MAIN MENU |
|
|
|
|
| DIGITAL/ANALOG |
|
|
|
|
|
|
| 2 | 8 |
MENU | + / – |
|
|
|
| INPUT SELECTOR |
|
|
|
|
|
|
| 1 | 9 |
g |
|
|
|
|
|
|
|
| SP SET UP EQ | SURR | LEVEL CUSTOM |
| 0 | 10 | |
PHONES |
|
|
|
|
|
|
|
| EQUALIZER BANK AUTO FORMAT | MODE | 2ch | AUDIO SPLIT |
|
| |
–+
|
|
|
| c |
|
|
|
|
|
|
ç |
|
|
|
| ç | c | ||||
|
|
|
|
|
|
|
|
|
|
|
| Playback component |
| Recording component | |||||||
|
| (program source) |
| (tape deck, MD deck, | ||||||
ç: Audio signal flow |
| VCR) |
|
| ||||||
|
|
|
|
| ||||||
c: Video signal flow |
|
|
|
|
| |||||
Recording on an audio tape or MiniDisc
You can record on a cassette tape or MiniDisc using the control amplifier. See the instruction manual of your tape deck or MD deck if you need help.
1Turn INPUT SELECTOR to select the component to be recorded.
2Prepare the component for playing.
For example, insert a CD into the CD player.
3Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary.
4Start recording on the recording deck, then start playback on the playback component.
Notes
•You cannot record a digital audio signal using a component connected to the analog TAPE REC OUT or MD/DAT REC OUT jacks. To record a digital audio signal, connect a digital component to the MD/DAT OPTICAL OUT jack.
•Sound adjustments do not affect the signal output from the TAPE REC OUT or MD/DAT REC OUT jacks.