Sony DCR-TRV60, TRV70 (1), (2), (3), (4), MEM, M I, Notes, – MEMORY MIX, Sample images, Before operation, Image data modified with your computer

Superimposing a still image in the “Memory Stick” on an image– MEMORY MIX

Notes

•You cannot use MEMORY MIX for moving pictures recorded on a “Memory Stick.” •When the overlapping still image has a large amount of white, the thumbnail image of

the picture may not be clear.

•When you use MEMORY MIX in the mirror mode (p. 29), the picture on the LCD screen appears normally without being mirror-reversed.

Image data modified with your computer

You may not be able to play back the images modified with your computer on your camcorder.

The “Memory Stick” supplied with your camcorder stores 20 images:

–For M. CHROM: 18 images (such as a frame) 101-0001~101-0018

–For C. CHROM: two images (such as a background) 101-0019~101-0020

Sample images

Sample images stored in the “Memory Stick” supplied with your camcorder are protected (p. 137).

Recording a superimposed image on a tape

Before operation

•Insert the “Memory Stick” containing still images into your camcorder. •Insert a tape for recording into your camcorder.

The POWER switch should be set to .

Operate by touching the panel.

(1) Press FN and select PAGE2.

(2) Press MEM MIX. The image recorded on the “Memory Stick” appears on the right lower part of the screen.

(3) Press – (to see the previous image)/+ (to see the next image) on the right lower corner of the screen to select the still image that you want to superimpose.

(4) Press a desired mode. The still image is superimposed on the moving picture during recording standby.

2
		MEM MIX
			OFF		MCCAM	OVER–			OK
	MEM				LUMI	LAP
		CAMCM			MCCAM					Still image
	M I X	CHROM			CHROM			1 0 1
								101–0001
							–		+
4
		MEM MIX
			OFF						OK
		M. LUMI				1 0 1
							101–0001
		–		+			–		+

Operations Stick” “Memory

(continued on the following page)

119