Playing back a tape with digital effect

The POWER switch should be set to

.

Operate by touching the panel.

 

(1) During playback or playback pause, press FN and select PAGE2.

(2) Press DIG EFFT. The screen to select a digital effect is displayed.

(3) Select a desired mode. You can use STILL, FLASH, LUMI. and TRAIL.

See pages 56, 57 for details on each mode. When you select STILL or LUMI., the picture where you select the mode is stored in memory as a still image.

(4) Press –/+ to adjust the effect.

(5) Press OK to return to PAGE2.

2

DIG

EFFT

DIG EFFT

OFF

OK

STILL FLASH LUMI. TRAIL

To return to FN

Press EXIT.

To cancel digital effect

Press OFF to return to PAGE2.

Notes

•You cannot process externally input scenes using digital effect.

•You cannot record images processed with digital effect on the tape on your camcorder. Record the processed images on the “Memory Stick” (p. 116, 125), or on a VCR using your camcorder as a player.

Pictures processed with digital effect

Pictures processed with digital effect are not output through the DV Interface.

72