Enlarging images recorded on the tape

– Tape PB ZOOM

Besides the operation described here, your camcorder can enlarge still images recorded on the “Memory Stick” (p. 135).

The POWER switch should be set to.

Operate by touching the panel.

(1) During playback or playback pause, press FN and select PAGE2.

(2) Press PB ZOOM. The PB ZOOM screen appears.

(3) Press the area you want to enlarge in the frame.

The area you have pressed moves to the center of the screen, and the playback image is enlarged to approximately at twice the size. If you press another area again, the area moves to the center of the screen.

(4) Adjust the zoom ratio by the power zoom lever.

You can select the zoom ratio from approximately 1.1 times up to five times its size.

W : To decrease the zoom ratio

T : To increase the zoom ratio

Power zoom lever

2

PB ZOOM

PB

ZOOM

END

To cancel tape PB ZOOM

Press END.

Notes

•You cannot process externally input scenes using tape PB ZOOM with your camcorder.

•You cannot record images processed with tape PB ZOOM on the tape on your camcorder. Record the processed images on a “Memory Stick” (p. 116) or on a VCR using your camcorder as a player.

•You cannot record moving pictures processed with tape PB ZOOM on the “Memory Stick” on your camcorder.

Images in tape PB ZOOM

Images in tape PB ZOOM are not output through the DV Interface.

In tape PB ZOOM

If you press DISPLAY/BATT INFO, the frame on the PB ZOOM screen disappears. You cannot move the part you have pressed to the center of the screen.

Edge of the image

The edge of the image cannot be displayed at the center of the screen.

Operations Playback Advanced

73