Sony DCR-TRV60, TRV70 (5), (6), (7), (1), (2), Note, image, – MEMORY MIX, During recording, Before operation, To cancel MEMORY MIX, To cancel MEMORY MIX

Superimposing a still image in the “Memory Stick” on an image

– MEMORY MIX

(5) Press –/+ on the left lower corner of the screen to adjust the effect, then press OK to return to PAGE2.

C. CHROM	– The color (blue) scheme of the area in the moving image
	which is to be swapped with a still picture
M. LUMI	– The color (bright) scheme of the area in the still image which
	is to be swapped with a moving picture
M. CHROM	– The color (blue) scheme of the area in the still image which is
	to be swapped with a moving picture
M. OVERLAP	– No adjustment necessary
	You can use M.OVERLAP only when the POWER switch is
	set to CAMERA.

(6) Press EXIT to return to FN.

(7) Press START/STOP to start recording.

To change the still image to be superimposed

Press –/+ on the right lower corner before Step 5.

To cancel MEMORY MIX

Press OFF to return to PAGE2.

Note

In Step 4, you cannot reselect the mode. Press OFF to return to PAGE2.

When you select M. OVERLAP

You cannot change the still image or the mode.

During recording

You cannot change the mode.

To record still images as-is to the tape

Press –/+ on the left lower corner of the screen in the M. LUMI mode and keep going until the bar display on the right is full.

Recording a superimposed image on a “Memory Stick” as a stillimage

Before operation

Insert the “Memory Stick” containing still images into your camcorder.

Image size of still images is automatically set to 640 ⋅ 480.

The POWER switch should be set to .

Operate by touching the panel.

(1) Follow Step 1 to 6 on pages 119, 120.

(2) Press PHOTO deeply to start recording.

Recording is complete when the bar scroll indicator disappears. The image displayed on the screen when you press PHOTO deeply is recorded on the “Memory Stick.”

120	To cancel MEMORY MIX
	Press OFF to return to PAGE2.