Sony DCR-TRV60, TRV70 (11), (12), (13), (14), (15), (16)

Dubbing only desired scenes – Digital program editing (on a tape)

(11) Select PAUSEMODE, then press EXEC.

(12) Select the mode to cancel recording pause on the VCR, then press EXEC. The correct button depends on your VCR.

Refer to the operating instructions of your VCR.

11						12
	V I DEO ED I T				END		V I DEO ED I T				END
		ED I T SET						ED I T SET
			CONTROL						CONTROL
			ADJ TEST						ADJ TEST
			”CUT - I N”						”CUT - I N”
			”CUT -OUT”						”CUT -OUT”
			I R SETUP	PAUSE					I R SETUP
			PAUSEMODE	REC					PAUSEMODE	PAUSE
			I R TEST	PB					I R TEST
				EXEC	RET.					EXEC	RET.

(13) Locate the infrared rays emitter of your camcorder and face it towards the remote sensor of the VCR about 30 cm (12 in.) apart.

Do not put any obstacles between the both equipment.

Infrared rays emitter VCR

Remote sensor

(14) Insert a recordable tape into the VCR, then set the VCR to recording pause.

(15) Select IR TEST, then press EXEC.

(16) Select EXECUTE, then press EXEC.

If the VCR starts recording, the setting is correct.

The indicator you selected to cancel recording pause on the VCR flashes on the screen. When finished, the indicator changes to COMPLETE.

15						16
	V I DEO ED I T				END		V I DEO ED I T				END
		ED I T SET						ED I T SET
			CONTROL						CONTROL
			ADJ TEST	ENGAGE					ADJ TEST
			”CUT - I N”						”CUT - I N”
			”CUT -OUT”	REC PAUSE					”CUT -OUT”
			I R SETUP						I R SETUP
			PAUSEMODE	RETURN					PAUSEMODE	COMPLETE
			I R TEST	EXECUTE					I R TEST
				EXEC	RET.					EXEC	RET.

82