Sony DCR-TRV60, TRV70 LOCK, LOCK, LOCK, at once, the index screen, • The image is protected, is automatically adjusted, c Set it to MEMORY (p. 11), cRelease the lock (p. 102)

Types of trouble and how to correct trouble

When operating using the “Memory Stick”

Symptom	Cause and/or Corrective Actions
Operations on the “Memory Stick”	• The POWER switch is not set to MEMORY.
do not function.	c Set it to MEMORY (p. 11).
	• The “Memory Stick” is not inserted.
	c Insert a “Memory Stick” (p. 104).

Recording does not function. • The “Memory Stick” has already been recorded to its full capacity.

cDelete unnecessary images and record again (p. 138).•The “Memory Stick” formatted incorrectly is inserted.

cFormat the “Memory Stick” using your camcorder or use another “Memory Stick” (p. 104, 177).

•The write-protect tab on the “Memory Stick” is set to LOCK.cRelease the lock (p. 102).

•You cannot record data in the 100MSDCF folder. It is only for playing back data.

The HOLOGRAM AF light from the • If the HOLOGRAM AF light reaches the subject, the focus

HOLOGRAM AF emitter deviates is automatically adjusted. from the center of the image.

The HOLOGRAM AF light from the	c Wipe the HOLOGRAM AF emitter with a dry cloth.
HOLOGRAM AF emitter is blurred
and adjusting the focus is difficult.
The image cannot be deleted.	• The image is protected.
	c Cancel image protection (p. 137).
	• The write-protect tab on the “Memory Stick” is set to
	LOCK.
	c Release the lock (p. 102).
	• You are trying to delete more than a hundred image files
	at once.
	c You can select up to a hundred image files to delete on
	the index screen.
You cannot format the “Memory	• The write-protect tab on the “Memory Stick” is set to
Stick.”	LOCK.
	c Release the lock (p. 102).
Deleting all the images cannot be	• The write-protect tab on the “Memory Stick” is set to
carried out.	LOCK.
	c Release the lock (p. 102).

You cannot protect the image. • The write-protect tab on the “Memory Stick” is set to LOCK.

cRelease the lock (p. 102).

•The index screen does not appear.cPress INDEX to display the index screen, then protect the image (p. 137).

Troubleshooting

(continued on the following page)

187