Quickly locating a scene

– Zero set memory

Your camcorder automatically searches for a desired scene having the tape counter value of “0:00:00”. Use the Remote Commander for this operation.

The POWER switch should be set to.

(1) During playback, press ZERO SET MEMORY on the Remote Commander at the point you want to locate later. The tape counter shows “0:00:00”, then starts counting. If the indicators do not appear, press DISPLAY. The ZERO SET MEMORY indicator flashes.

(2) Press x when you want to stop playback.

(3) Press m to rewind the tape to the tape counter’s zero point. The tape stops automatically when the tape counter reaches approximately zero.

(4) Press N. Playback starts from the counter’s zero point.

ZERO SET MEMORY

DISPLAY

m N

x

Notes

•When you press ZERO SET MEMORY before rewinding the tape, the zero set memory function will be canceled.

•There may be a discrepancy of several seconds between the time code and the tape counter.

•The ZERO SET MEMORY indicator disappears when you press FN.

If the tape has a blank portion between recorded portions

The zero set memory function may not work correctly.

74