Dubbing only desired scenes

– Digital program editing (on a tape)

You can duplicate selected scenes (programs) for editing onto another tape without operating the VCR.

Scenes can be selected by frame. You can set up to 20 programs.

Your camcorder can dub on a “Memory Stick.” See page 127 for details.

Unwanted

 

 

 

Unwanted

scene

 

 

 

scene

 

 

 

 

 

 

 

 

Switch the order

Before operating Digital program editing having the tape recorded on other equipment

Step 1 Connecting to the VCR.

Step 2 Setting the VCR for operation (p. 81).

Step 3 Adjusting the synchronization of the VCR (p. 84).

When you dub using the same VCR again, you can skip Step 2 and 3.

Using Digital program editing having the tape recorded on other equipment

Operation 1 Making a program (p. 86).

Operation 2 Performing the program (Dubbing on the tape) (p. 88).

Note

When editing digital video, the operation signals to the VCR cannot be sent with the LANC jack.

Step 1: Connecting to the VCR

You can connect either the A/V connecting cable or the i.LINK cable.

Connect the devices as illustrated on page 78.

80