Sony DCR-TRV60, TRV70 [a], [A], [B], [C], [A], [B], [C], (1), [a], (2), [c], (3), (4), [b], (5), [b][c]

Inserting a scene from a VCR

– Insert editing

You can insert a new scene with sound from a VCR onto your originally recorded tape by specifying the insert start and end points. Use the Remote Commander for this operation.

Connections are the same as on page 89. Insert the cassette containing the desired scene to insert into the VCR.

[a]

[A][b][c]

[B][C]

[A] The tape that contains the scene to be inserted [B] The tape before editing

[C] The tape after editing

The POWER switch should be set to.

Operate by touching the panel.

(1) On the VCR, locate just before the insert start point [a], then set the VCR to playback pause.

(2) On your camcorder, locate the insert end point [c], then set it to playback pause.

(3) Press ZERO SET MEMORY on the Remote Commander. The ZERO SET MEMORY indicator flashes and the end point of the insert is stored in memory. The tape counter shows “0:00:00”.

(4) On your camcorder, locate the insert start point [b] and set your camcorder to recording pause.

1Press FN and select PAGE3.

2 Press REC CTRL.

3 Press REC PAUSE.

(5) First press X on the VCR, and after a few seconds press REC START on your camcorder to start inserting the new scene with sound.

Inserting automatically stops near the zero point on the tape counter. Your camcorder automatically stops recording and the zero point set with ZERO SET MEMORY is cleared from memory.

Editing

91