6 Press the select L button (Back).

The Main Screen appears.

Canceling Auto Start

Perform the same procedures as for setting Auto Start and select ON instead of OFF in Step 4.

If you set Auto Start for other operation software, the Auto Start function set on this software canceled.

Interrupting Auto Start

Press the select L button (Menu) within about two seconds after the Main Screen appears after turning the UCP-8060 on, and Auto Start is interrupted.

Formatting a Memory Stick

1 Start the BIOS Utility.

For starting the BIOS Utility, see “Confirming of the Basic Information” on page 35.

2 Insert a Memory Stick into the Memory Stick slot with the label side up.

3 Press the select R button (Memory Stick Format). 4 Select the format type: Full or Quick.

Normally press the select R button (Quick).

5 Press the select R button (YES).

Once “DONE” appears on the screen, formatting of the Memory Stick is complete, and the MSSONY/PRO/UCP folder is created.

Note

Formatting of the Memory Stick deletes all files stored in the Memory Stick.

Soft Reset

Press the select L and R buttons simultaneously for more than 3 seconds. A soft reset of the UCP-8060 is executed.

System Setup

The following items are enabled with the SYSTEM SETUP UTILITY.

•Device Control

–Adjusting the brightness of the display window

–Adjusting the sound level for the touch-panel beep and testing it

–Adjusting the sensitivity of TouchEngine

–Specifying ON or OFF for the touch-panel beep

•Setting the date and time

•Setting the TCP/IP address

•Calibrating the relationship between the display and touch panel

•Scribble test

•Self-diagnosis

Activating the SYSTEM SETUP UTILITY

Select SYSTEM SETUP UTILITY on the Main Screen to activate it. The SYSTEM SETUP UTILITY display appears.

SYSTEM SETUP UTILITY

Version 1.xx

 

 

 

 

 

Device Control

 

 

 

 

 

 

Adjust Time

Set TCP/IP Config

Calibrate Touch Panel

Scribble Test

Self Diagnosis

Exit

03:13:00

Select an item you wish to set.

For details on selecting an item, see “Basic Operations” on page 34.

Functions of Each Menu Item

Device Control

Adjust each item with the following procedures:

1 Turn the jog roller to select an item to be adjusted.

2 Press the jog button to adjust the item.

3 Press the jog roller to register your adjusted value.

36 System Setup