If the operation software has not been installed
1 Press the select L button (Back).
The Main Screen appears.
2 Press the select R button (Install).
The Install display appears.
3 Touch the keyboard icon on the task bar.
The keyboard appears on the screen.
4 Enter the URL address for the operation software to be installed, and the file name of the operation software, then press the select R button (OK).
Note
Be sure to enter the filename of the operation software with the extension “jad.”
5 Press the select R button (Go).
Information on the operation software to be installed appears.
6 If the displayed information is correct, press the select R button (Yes).
Installation begins. While reading and writing data, the status indicator is lit or blinking.
When installation is complete, a message to indicate this appears on the screen.
Note
While reading and writing data, never turn the power of the
7 Press the select R button (Restart).
The Main Screen appears. Check that the name of the installed operation software appears.
Setting the URL address
1 Select “http://” with the jog roller, and push the jog roller.
2 Touch the keyboard icon on the task bar.
The keyboard display appears on the screen.
3 Enter the URL address for the operation software to be installed.
4 Press the select L button (OK).
The Install Settings display appears.
Updating the Operation Software
You can update the installed operation software following the procedures below, and the upgraded operation software can be used.
To obtain the operation software, consult your Sony representative.
Note
The memory capacity to store the operation software is limited. You may remove some operation software when you intend to install new software.
For details on removing software, see “Removing the Operation Software” on page 42.
Requirements
•Computer (to enable copying files to a Memory Stick if a Memory Stick is to be used)
•Operation software to be installed (two files, with the extensions “jar” and “jad”)
Updating the installed operation software using a Memory Stick
• Memory Stick
Preparations
1 Copy the operation software to a Memory Stick or to an HTTP server using a computer.
To copy onto a Memory Stick, prepare a folder named MSSONY/PRO/UCP, then copy to a folder under UCP.
When you format the Memory Stick on this machine, the MSSONY/PRO/UCP folder is automatically created.
Note
If the filename or folder name has any
2 Turn the
The Main Screen appears.
For details on the IP address of the HTTP server and the network connection, consult your network administrator.
40 Updating the Operation Software