Updating

Updating requires about 15 minutes or more. Follow the instructions on the screen.

Notes

•Never interrupt the installation.

•Never turn the power of the UCP-8060 off during installing. The system files may be damaged.

1 Press the select L and R buttons while holding the function 2 button pressed for more than 3 seconds until the function 2 button lights. Once the function 2 button lights, release the buttons.

The UPDATE UTILITY starts.

You can start the UPDATE UTILITY from the Shutdown display.

2 Insert the Memory Stick to which the system files have been copied into the Memory Stick slot.

3 Press the select R button following the instructions on the screen.

Updating begins.

When updating is complete, a message appears.

4 Remove the Memory Stick.

5 Press the select R button (Reboot).

The UCP-8060 is rebooted.

6 Once the operation software is updated, a calibration display appears. Push the center of the crosshairs using a pen.

The relationship between the screen and touch panel is calibrated.

7 Re-install the operation software to be used.

For details on installing the operation software, see “Installation of the Operation Software” on page 38.

Using a “Memory Stick”

About a “Memory Stick”

What is “Memory Stick”?

“Memory Stick” is a new compact, portable and versatile IC (Integrated Circuit) recording medium with a data capacity that exceeds a floppy disk.

“Memory Stick” is specially designed for exchanging and sharing digital data among “Memory Stick” compatible products. Because it is removable, “Memory Stick” can also be used for external data storage.

“Memory Stick” is available in two sizes: standard size and compact “Memory Stick Duo” size. Once attached to a Memory Stick Duo adapter, “Memory Stick Duo” turns to the same size as standard “Memory Stick” and thus can be used with products compliant with standard “Memory Stick.”

Types of “Memory Stick”

“Memory Stick” is available in the following six types to meet various requirements in functions.

• “Memory Stick-R”

Stored data are not overwritten. You can write data to “Memory Stick-R” with “Memory Stick-R” compatible products only. Copyright protected data that requires MagicGate copyright protection technology cannot be written to “Memory Stick-R.”

• “Memory Stick”

Stores any type of data except copyright-protected data that requires the MagicGate copyright protection technology.

• “MagicGate Memory Stick”

Equipped with the MagicGate copyright protection technology.

• “Memory Stick-ROM”

Stores pre-recorded, read-only data. You cannot record on “Memory Stick-ROM” or erase the pre-recorded data.

• “Memory Stick PRO”

Equipped with the MagicGate copyright protection technology, designed for use only with equipment compatible with “Memory Stick PRO.”.

•“Memory Stick” (with memory select function)

Equipped with the multiple memories (128 MB). You can select the memory to use with the memory selects switch on the back of the “Memory Stick.” You cannot use different memories simultaneously or continuously.

44 Using a “Memory Stick”