Updating

Updating using a Memory Stick

1 Insert the Memory Stick in which the operation software has been copied into the Memory Stick slot.

2 Select the operation software to be updated on the Main Screen.

3 Press the select L button (Menu).

The Menu display appears.

4 Select Update by turning the jog roller, then press the select R button (Enter).

The Update display appears. Check that the displayed software is the version of the operation software to be updated.

5 Press the select R button (Yes).

Information on the operation software to be updated appears.

6 If the displayed information is correct, press the select R button (Yes).

Updating begins. While reading and writing data, the status indicator is lit or blinking.

When updating is complete, a message to indicate this appears on the screen.

Note

While the system is reading and writing data, never turn the power of the UCP-8060 off, or remove the installed Memory Stick. The file may be damaged.

7 Remove the Memory Stick.

8 Press the select R button (Restart).

The Main Screen appears.

Note

If the operation software is protected, it cannot be updated.

Updating using the Internet

1 Check that the UCP-8060 is connected to the Internet.

2 Select the operation software to be updated on the Main Screen.

3 Press the select L button (Menu).

The Menu display appears.

4 Select Update by turning the jog roller, then press the select R button (Enter).

The Update display appears. Check that the displayed software is the version of the operation software to be updated.

5 Press the select R button (Yes).

Information on the operation software appears.

6 If the displayed information is correct, press the select R button (Yes).

Updating begins. While the system is reading and writing data, the status indicator is lit or blinking.

When update is complete, a message to indicate this appears on the screen.

Note

While the system is reading and writing data, never turn the power of the UCP-8060 off or remove the installed Memory Stick. The file may be damaged.

7 Press the select R button (Restart).

The Main Screen appears.

Note

If the operation software is protected, it cannot be updated.

Updating the Operation Software

41