Sony UCP-8060 Removing the Operation, Software, Software, Protecting the Operation

Removing the Operation	Protecting the Operation
Software	Software

You can remove the operation software from the UCP- 8060 following the procedure below. You cannot remove the system setup utility.

1 Select the operation software to be removed on the Main Screen.

2 Press the select L button (Menu).

The Menu display appears.

3 Select Remove by turning the jog roller, then press the select R button (Enter).

The Remove display appears.

4 Press the select R button (Yes).

The confirmation message appears. Check that the selected software is the version of the operation software to be removed.

5 Press the select R button (Yes).

The selected operation software is removed. When this is completed, the Main Screen appears.

The Main Screen appears.

Note

If the operation software is protected, it cannot be updated.

If the operation software is protected, updating, deleting, or installing of the operation software is prevented. You can protect the operation software following the procedure below.

1 Select the operation software to be protected on the Main Screen.

2 Press the select L button (Menu).

The Menu display appears.

3 Select Info by turning the jog roller, then press the select R button (Enter).

The Info display appears.

4 Press the select R button (Protect) to set the Protect to On.

The protection is set.

5 Press the select L button (Back).

The Menu display appears.

6 Press the select L button (Back).

The Main Screen appears.

To cancel the protection

Set Protect to Off in step 4.

42 Removing the Operation Software / Protecting the Operation Software