(Model
Use “SFT.H” and “SFT.V” menu item to set the vertical and horizontal range of the image to be printed.
A change in “SIZE.H” and “SIZE.V” values changes the upper limit of the “SFT.H” and “SFT.V” range.
The approximate position of the printing range is shown on the monitor.
SFT.HSIZE.H
SFT.V
SIZE.V
Captured image | Printing range |
(Model
You can set the printing range vertically and horizontally using “SFT:V” and “SFT.H” menu items.
Also, “0” is the default position when setting the shift with “SFT.H” and “SFT.V”. The value is negative when the default position is shifted to the left (i.e., when “SFT.V” is increased). And the value is positive when the default position is shifted to the right (i.e., when “SFT.V” is decreased).
The approximate position of the printing range is shown on the monitor.
SFT.H | Shift due to “SCAN” |
| setting value* |
SFT.V
Shift due to “SCAN” setting value*
Adjusting the Contrast and Brightness
You can adjust the contrast and brightness of the unit using the CONTRAST control and BRIGHT control on the front panel.
To adjust the contrast
You can adjust the contrast of printouts using the CONTRAST control.
To make the contrast stronger: Turn the CONTRAST control clockwise.
To make the contrast weaker: Turn the CONTRAST control counterclockwise.
To adjust the brightness
You can adjust the brightness of printouts using the BRIGHT control.
To make the image brighter: Turn the BRIGHT control clockwise.
To make the image darker: Turn the BRIGHT control counterclockwise.
Note
When the menu operation function is locked, CONTRAST and BRIGHT controls are also disabled in addition to the jog dial. If you want to use the CONTRAST and BRIGHT controls, contact the nearest authorized dealer.
Mode Analog
Captured image | Printing range |
*Depending on the “SCAN” value, there are three possible printing ranges. For details, refer to “Menu List.”
Printing 25