Mode Digital
To continue menu operations
Make settings by repeating steps 3 to 5.
To end the menu operation
1 Display “BACK” by turning the jog dial after performing the operation of step 5.
2 Press the jog dial.
The unit exits the menu mode.
Menu lock function
If the message “LOCK” is displayed and you hear the alarm sound when you press the jog dial, the jog dial is disabled because the menu operation function is locked. If you want to perform a menu operation, contact the nearest authorized dealer.
Registering Menu Settings
You can store up to three sets of settings made using the menu, and you can load the desired setting when needed. The unit retains these settings even if you turn off the power.
Note
When you use the unit for the first time after you purchase it, factory settings are registered in all three of the stored selections.
Registering new settings
1 Make all of the required settings.
2 Display “SAVE” by turning the jog dial, and then press the jog dial.
3 Display the desired number by turning the jog dial, and then press the jog dial, again.
The settings made in step 1 are registered in the number selected in step 3.
Loading the desired settings
You can load the desired settings and make printouts with the loaded settings.
1 Confirm that “READY” is displayed on the LCD, and press the jog dial.
2 Display “LOAD” by turning the jog dial, and then press the jog dial again.
3 Display the number corresponding to the desired settings, and then press the jog dial.
Settings corresponding to the number selected in step 3 are loaded.
When you change the loaded settings
The unit operates according to the changed settings. In this case, the unit operates according to these settings until you load another set of settings, even if you turn off the unit. When you load another group of settings, the settings loaded previously are cleared.
To retain previously loaded settings
Example: Settings registered as “SA:1” are loaded and settings are to be changed. To retain the original settings of “SA:1” and to register the new settings as “SA:2,” proceed as follows.
1 Load the settings of “LO:1” following the procedure for loading the desired settings.
2
3 Select “SA:2” following procedure for registering the settings.
4 Press the jog dial.
The settings, changed in step 2, are registered as “SA:2” (No.2).
Printing the Menu List
You can make a printout of the current menu settings.
1 Press the jog dial.
The menu item you changed last is displayed.
2 Display “MENU” by turning the jog dial, and then press the jog dial.
3 Display “ME:OK” by turning the jog dial and then press the jog dial.
The unit starts printing the current menu settings. MENU is displayed on the LCD.
4 Display “BACK” by turning the jog dial, and then press the jog dial.
The unit returns to the normal printing mode.
32 Adjustments and Settings Using the Menu