Mode Digital
Digital Mode
Connections
After connecting the USB connecting cable (supplied) to the unit and the computer, connect the power cord. For details about the unit connection, refer to the manuals for the computer or other peripheral devices.
Notes
•Before connecting the unit to the computer, turn off the unit, computer, monitor, and all peripheral devices connected to the computer.
•Before connecting the unit to the computer, disconnect the power cord from the unit. Connect the power cord to the unit only after connecting the unit and the computer.
•Follow the connection procedures described in the computer manual.
•Make sure that the cables are connected securely at both ends.
•After completing connections, switch to the digital mode before turning the power on.
•The printer will not print images imported via the VIDEO IN connector.
•The unit drive software provided with the unit is not suitable for using the unit connected to a network.
•Printer operation is not guaranteed when connecting to the computer using the USB cable via a hub.
•Two or more units cannot be connected to a single computer.
Connecting to the USB Connector
to 
(USB) connector
USB connecting cable (supplied)
Installing the Printer Driver
Install the printer driver provided with the printer. For detailed instructions about how to install the unit driver, refer to the Readme.txt file included on the supplied CD- ROM disc.
Adjustments and Settings Using the Menu
You can carry out adjustments and settings to meet your requirements. Those settings and adjustments are retained even if the unit is turned off.
You can set up the unit according to its intended purpose, connected equipments or your individual preferences.
You can store up to three settings as a set of user settings.
26 Connections / Adjustments and Settings Using the Menu