Others
Precautions
On Safety
•Check the operating voltage before operation. Operate the unit only with a power source specified in “Specifications”.
•Stop operation immediately if any liquid or solid object falls into the cabinet. Unplug the unit and have it checked by qualified personnel.
•Unplug the unit from the wall outlet if you will not be using it for a long time. Disconnect the power cord by grasping the plug. Never pull the cord itself.
•Do not disassemble the cabinet. Refer servicing to qualified personnel only.
•Connect the power plug of the unit to a wall outlet with a protective earth terminal. The safety earth should be properly established.
Caution on the paper cutter
Apaper cutter is mounted with the
On the Printer Carriage
Do not carry or move the unit when the paper roll is placed in the unit. Doing so may cause a malfunction.
On Installation
•Place the unit on a level and stable surface.
If you use the unit with placed on an uneven surface, malfunction of the unit is likely to occur.
•Do not install the unit near heat sources. Avoid locations near radiators or air ducts, or places subject to direct sunlight or excessive dust, humidity, mechanical shock or vibration.
•Provide adequate air circulation to prevent heat build- up. Do not place the unit on surfaces such as rugs, blankets, etc., or near materials such as curtains and draperies.
•To prevent internal heat
Ventilation holes (intake)
Ventilation holes (exhaust)
•If the unit is subjected to wide and sudden changes in temperature, such as when it is moved from a cold room to a warm room or when it is left in a room with a heater that tends to produce large amounts of moisture, condensation may form inside the unit. In such cases the unit will probably not work properly, and may even develop a fault if you persist in using it. If moisture or condensation forms, turn off the power and allow the unit to stand for at least one hour.
Others
Precautions 35