If the paper cannot be ejected smoothly after printing, the platen roller may be dirty.
In such a case, clean the platen roller with a soft cloth moistened with a damp clothe soaked in water and a mild detergent.
1 Press the power ON/OFF switch to ON to turn the unit on.
2 Press the OPEN/CLOSE button to open the paper door.
3 Clean the platen roller gently with a damp clothe soaked in water and a mild detergent.
Platen roller
Notes
•After the surface of the platen roller wiped has been dried completely, turn the platen roller to clean another portion.
•Turn the platen roller with hands.
•The
4 Press the OPEN/CLOSE button to close the paper door.
Specifications
Power requirement
100 to 240 VAC, 50/60 Hz
Input current 2.4 A to 1.3 A max. at 25 °C Operating temperature
5 °C to 35 °C (41 °F to 95 °F) Operating humidity
20 % to 80 %
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
| 20 % to 80 % |
Storage and transport pressure | |
| 700 hPa to 1,060 hPa |
Dimensions | 316 ⋅ 132.5 ⋅ 305 mm (w/h/d) |
| (12 1/2 ⋅ 5/ 1/4 ⋅ 12 1/8 inches) |
Mass | 8 kg (17 lb 10 oz) (printer only) |
Thermal head | |
Gradation | |
Resolution | EIA: 1,280 ⋅ 508 dots |
| CCIR: 1,280 ⋅ 612 dots |
Picture size | When “S:STD” is selected from |
| “SIDE” |
| EIA: 188 ⋅ 143 mm |
| CCIR: 188 ⋅ 140 mm |
| When “S:SIDE” is selected from |
| “SIDE” |
| EIA: 249 ⋅ 190 mm |
| CCIR: 252 ⋅ 188 mm |
Printing speed | About 8 sec./image |
(at standard setting)
Picture memory Analog mode:
6 frames (800 k ⋅ 8 bits per frame) Digital mode:
3,414 ⋅ 2,560 dots max.
Input connector VIDEO IN (BNC type)
EIA or CCIR composite video signals
1.0
Output connector
VIDEO OUT (BNC type)
EIA or CCIR composite video signals
1.0
REMOTE connector (stereo mini jack)
Others
Maintenance / Specifications | 37 |
|
|