Symptom | Cause/Remedy | |
The pointing device | cPOINTING DEVICE switch is set to OFF. Set the switch | |
does not work. |
| to ON. |
| • | Make sure that batteries are inserted in the keyboard. |
|
| cInsert new batteries into the keyboard properly, and |
|
| press the CONNECT button on the receiver. Then, |
|
| within 10 seconds, press the CONNECT button on the |
|
| keyboard. Make sure that the keyboard is close to the |
|
| receiver (within 11.8 in or 30 cm) when you press the |
|
| button. |
| • | Check to see if the batteries are low. |
|
| cTo see if the batteries are low, check the battery |
|
| indicator on the |
|
| When the batteries are low, replace the batteries as |
|
| described in “Inserting batteries into the keyboard” |
|
| (page 10). |
| • | Check if the keyboard POWER switch is set to ON. |
| • | When multiple |
|
| keyboards may not function properly due to radio |
|
| interference. |
|
| cIn this case, perform the following steps. |
1 Remove the batteries from the keyboard for at least one minute.
2 Reinsert the batteries into the keyboard and press the CONNECT button on the receiver.
3 Then, within 10 seconds, press the CONNECT button on the keyboard. Make sure that the keyboard is close to the receiver (within 11.8 in or 30 cm) when you press the button.
When using multiple
cThe pointing device senses the pressure of your finger and moves accordingly. If pointer response seems sluggish, press the pointing device more firmly.