Location and Function of Controls

Top/Front/Left Side

Rear/Right Side/Bottom

 

0

4

 

5

qa

 

 

qs

6

qd

7

 

8

qf

 

9

qg

1Control panel

For details, see “Control Panel” on page 12.

2Lens protector (lens cover)

The lens protector automatically opens when the power is turned on.

3Ventilation holes (exhaust)
4Remote control detector
5Adjuster (hind pad)

Turn the adjuster to the right or left for minor tilt adjustment of the projected picture.

6Ventilation holes (intake)/Lamp cover
7Ventilation holes (intake)/air filter cover

Notes

•Do not place anything near the ventilation holes as it may cause internal heat build-up.

•Do not place your hand or objects near the ventilation holes as it may cause the air coming out heat build- up.

•To maintain optimal performance, clean the air filter every 500 hours.

For details, see “Cleaning the Air Filter” on page 42.

8Ventilation holes (intake)
9Powered tilt adjuster
0Indicators
POWER SAVING

Lights up when the projector is in power saving mode.

TEMP (Temperature)/FAN

Lights up or flashes under the following conditions:

–Lights up when temperature inside the projector becomes unusually high.

–Flashes when the fan is broken.

LAMP/COVER

Lights up or flashes under the following conditions:

–Lights up when the lamp has reached the end of its life or becomes a high temperature.

–Flashes when the lamp cover is not secured firmly.

For details, see pages 34, 45.

qa Focus ring

Adjusts the picture focus.

qs Zoom ring

Adjusts the picture size.

Overview

Location and Function of Controls 11