The INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING | |
Tilt... |
|
V Keystone: | Auto |
Image Flip: | Off |
Background: | Blue |
Lamp Mode: | Standard |
High Altitude Mode: Off | |
Security Lock: | Off |
Setting items | Functions | Initial setting |
|
| value |
|
|
|
Tilt... | Adjusts the position (height) of the projected picture. |
|
|
|
|
V Keystone | Corrects the trapezoidal distortion caused by the projection | Auto |
| angle. Select “Auto” for automatic correction, or “Manual” |
|
| for manual correction using the b/v/B/V key on the |
|
| Remote Commander. |
|
| When the bottom of the trapezoid is longer than the top |
|
| : Sets a lower value. |
|
| When the top of the trapezoid is longer than the bottom |
|
| : Sets a higher value. |
|
|
|
|
Image Flip | Flips the image on the screen horizontally and/or vertically. | Off |
| • Off: The image does not flip. |
|
| • HV: Flips the image horizontally and vertically. |
|
| • H: Flips the image horizontally. |
|
| • V: Flips the image vertically. |
|
|
|
|
Background | Select the background color of the screen when no signal is | Blue |
| input to the projector. Select “Black” or “Blue.” |
|
| Normally, set to “Blue.” |
|
|
|
|
Lamp Mode | Sets the lamp brightness in the projection. | Standard |
| • High: Illuminates the projected image brightly. |
|
| • Standard: Reduces fan noise and power consumption. |
|
| The brightness of the projected image will be lower |
|
| compared with the “High” setting. |
|
|
|
|
High Altitude | Set to “On” when the projector is used at an altitude of | Off |
Mode | 1,500 m or higher. |
|
|
|
|
Security Lock | Turns on the projector’s security lock function. | Off |
| When set to “On,” turns on the security lock function, which |
|
| locks the projector once a password has been set. |
|
| For details, see “Security Lock” on page 24. |
|
|
|
|
36 The INSTALL SETTING Menu