1 Press the MENU key, then turn off the “Security Lock” setting in the INSTALL SETTING menu.
2 Enter the password.
Enter the password that was set.
Note
If you call the customer service center because you have forgotten the password, you will need to be able to verify the projector’s serial number and your identity. (This process may differ in other countries.) Once your identity has been confirmed, we will provide you with the password.
Other Functions
Off & Go Function (VPL-CS7 only)
If you are leaving the conference room immediately, turn the projector off, the powered tilt adjuster is put away in the projector, and then, after the lens protector closes, you can unplug the AC power cord. After the AC power cord is unplugged, the fan runs for a certain time automatically.
Notes
•When unplugging the AC power cord, ensure that the powered tilt adjuster is put away in the projector and the lens protector closes.
Moving the projector with the powered tilt adjuster raised may damage the adjuster.
•Turn off the projector according to the procedure in “Turning off the power”, then cool it down when storing the projector in the carrying case.
•However, if the unit has been on for less than 15 minutes, the fan might not begin to turn as a result of inadequate charging. In that case, follow the procedure for turning off the power as described in “Turning Off the Power” on page 21.
Function Convenient
Other Functions 25