Setting items

Functions

Initial setting value

 

 

 

Power Saving

When set to “On,” the projector goes into power

Off

 

saving mode if no signal is input for 10 minutes.

 

 

Although the lamp goes out, the cooling fan keeps

 

 

running. The power saving mode is canceled when a

 

 

signal is input or any key is pressed. In power saving

 

 

mode, any key does not function for the first 60

 

 

seconds after the lamp goes out.

 

 

 

 

Illumination

Selects whether the SONY logo on the top panel of

On

 

the projector lights when the projector is on.

 

 

 

 

Panel Key Lock

Locks all the control panel keys on the rear and side

Off

 

panels of the projector so that the projector can be

 

 

operated only with the Remote Commander.

 

 

To lock the control panel keys, set to “On.”

 

 

When it is set to “On,” keeping the I/1 key on the

 

 

control panel pressed for 10 seconds turns the

 

 

projector on when it is in standby mode, and turns the

 

 

projector to standby mode when the power is on. If

 

 

you keep pressing the MENU key for about 10

 

 

seconds when the power is on, the lock will be

 

 

released and “Panel Key Lock” is automatically set to

 

 

“Off.”

 

 

 

 

Notes

•Press the APA key when the full image is displayed on the screen. If the projected image includes much black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen.

•You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the screen.

•The picture may not be adjusted properly depending on the kinds of input signals.

•Adjust the items “Dot Phase,” “H Size” and “Shift” in the INPUT SETTING menu when you adjust the picture manually.

34 The SET SETTING Menu