Sony VPL-CS7 Remote Commander, 2ENTER/arrow key (v/V/b/B), 3MENU key, 4D ZOOM +/– key, 5Infrared transmitter, 6FREEZE key, 7INPUT key, 8APA (Auto Pixel Alignment) key

Remote Commander

1I / 1 (on/standby) key

2ENTER/arrow key (v/V/b/B)

Press the center of the key to use

ENTER.

3MENU key

4D ZOOM +/– key

Enlarges the image at a desired location on the screen.

5Infrared transmitter

6FREEZE key

Used to freeze the picture projected. To cancel the freeze function, press the key again.

7INPUT key

8APA (Auto Pixel Alignment) key

Adjusts a picture clearest automatically while a signal is input from a computer.

For details, see “Smart APA” in the SET SETTING menu on page 33.

9D KEYSTONE key

Used to adjust the tilt of the projector, or the trapezoidal distortion of the image manually. Each time you press this key, the Tilt menu and the V Keystone menu is displayed alternately. Use the arrow key (v/V/b/B) for the adjustment.

q; RESET key

Resets the value of an item back to its factory preset value or returns the enlarged image back to its original size. This key functions when the menu or a setting item is displayed on the screen.

Before using the Remote

Commander

Pull out the clear film from the lithium battery holder.

To replace battery

1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander.

2 Install the lithium battery.

+side facing upward

3 Put the lithium battery holder back into the Remote Commander.

Notes on the lithium battery

•Keep the lithium battery out of the reach of children.

•Should the battery be swallowed, immediately consult a doctor.

14 Location and Function of Controls