Security Lock

The projector is equipped with a security lock function. When you turn the power of the projector on, you are required to input the previously set password. If you do not input the correct password, you will not be able to project the picture.

Note

You will not be able to use the projector if you forget your password and the password administrator is not available. Be please aware that using the security lock can prevent valid usage in such cases.

To use the security lock

1 Press the MENU key and then, in the INSTALL SETTING menu, turn on the “Security Lock” setting.

2 Enter the password.

Use the MENU, v/V/b/B, and ENTER keys to enter the four-digit password. (The default setting is “ENTER, ENTER, ENTER, ENTER.” Input “ENTER” four times when you use the projector for the first time.)

Enter password key.

Password required for power-on.

Use:

Cancel: Other key

Next, the screen for entering a new password is displayed. (Enter the current password at this screen if you want to keep it.)

Enter new password key.

Power-on cannot be performed without the password.

Use:

Cancel: Other key

3 Enter the password again to confirm.

Re-enter new password key.

Be sure to remember this password.

Use:

Cancel: Other key

The security lock is completed when the following message appears.

INSTALL SETTING

X Input A

Tilt...

 

V Keystone:

Auto...

Image Flip:

Off

Background:

Blue

Lamp Mode:

Standard

High Altitude Mode: Off

Security Lock:

On

Security Lock enabled!

If the menu screen displays an “Invalid Password!” message, do over again from step 1.

INSTALL SETTING

X Input A

Tilt...

 

V Keystone:

Auto...

Image Flip:

Off

Background:

Blue

Lamp Mode:

Standard

High Altitude Mode: Off

Security Lock:

Off

Invalid Password!

4 Turn the main power off and disconnect the AC power cord.

The security lock is set to on, then it becomes effective. The screen for entering the password is displayed when the power is turned on the next time.

Security certification

When the screen for entering the password is displayed, enter the password that was set. If you fail to enter the correct password after three tries, the projector cannot be used. In this case, press the I / 1 key to turn off the power.

24 Security Lock