Sony VPL-CS7 The SET SETTING Menu

The SET SETTING Menu

The SET SETTING menu is used for changing the settings of the projector.

SET SETTING	Input-A
Smart APA:	On

Auto Input Search: Off

Input-A Signal Sel.: Computer

Color System: Auto

Power Saving: Off

Illumination: On

Panel Key Lock: Off

Setting items	Functions	Initial setting value
Smart APA	The APA (Auto Pixel Alignment) automatically	On
	adjusts “Dot Phase,” “H Size” and “Shift” in the
	INPUT SETTING menu for the input signal from a
	computer.
	• On: When a signal is input from a computer, the
	APA functions automatically so that the picture can		Adjustments
	be seen clearly. Once the specified input signal has
	been adjusted by the “Smart APA,” it will not be
	readjusted even when the cable is disconnected and
	connected again or the input channel is changed.
	You can adjust the picture by pressing APA key on		and
	the Remote Commander even if the “Smart APA”
	set to “On.”		Settings
	• Off: The APA functions when you press the APA
	key on the Remote Commander.
Auto Input Search	When set to “On,” the projector detects input signals	Off	Using
	in the following order: Input-A/Component (VPL-
	ES2 only) /Video/S-Video. It indicates the input		the
	channel when the power is turned on or the INPUT
	key is pressed.		Menu
Input-A Signal	Selects the “Computer,” “Component” or “Video	Computer
Sel.	GBR” signal input from the INPUT A connector.
Color System	Selects the color system of the input signal.	Auto
	If you select “Auto,” the projector detects the color
	system of the input signal automatically. If the picture
	is distorted or colorless, select the color system
	according to the input signal.
	When the color system of the input signal is PAL60,
	select “PAL.” If “Auto” is selected, the color system
	cannot be detected.

The SET SETTING Menu 33