5 Insert the new lamp all the way in until it is securely in place (1). Tighten the two screws (2). Fold the handle (3).

authorities or Electronics Industries Alliance (http://www.eiae.org).

Notes

•Be careful not to touch the glass surface of the lamp.

•The power will not turn on if the lamp is not secured properly.

6 Close the lamp cover and tighten the screws.

7 Turn the projector back over.

8 Connect the power cord. The ON/ STANDBY indicator around the I/1 key lights in red.

9 Press the following keys on the remote commander in the following order for less than five seconds each: RESET, b, B, ENTER.

Note

Do not put your hands into the lamp replacement spot, or not fall any liquid or

object into it to avoid electrical shock or fire

Disposal of the used lampFor the customers in the USA

This product contains mercury. Disposal of this product may be regulated if sold in the United States. For disposal or recycling information, please contact your local

Maintenance

Replacing the Lamp 41