–Flashes when the lamp cover is not secured firmly.

For details on the LAMP/COVER indicator, see page 44.

qa Focus ring

Adjusts the picture focus.

qs Zoom ring

Adjusts the picture size.

qd Connector panel

For details, see “Connector Panel” on page 13.

qf Speakerqg Security lock

Connects to an optional security cable (Kensington’s).

Web page address: http://www.kensington.com/

Control Panel

INPUT

TILT

MENU

PUSH

 

 

ENTER

 

Overview

1 2 3

4

 

5 6

7

 

 

1I / 1 (on/standby) key

Turns on the projector when the projector is in standby mode. The ON/ STANDBY indicator around the I / 1 key lights in green when the power is turned on.

When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about two seconds.

For details on steps for turning off the power, see “To turn off the power” on page 27.

2ON/STANDBY indicator (located around the I / 1 key)

Lights up or flashes under the following conditions:

–Lights in red when a AC power cord is plugged into a wall outlet. Once in standby mode, you can turn on the projector with the I / 1 key.

–Lights in green when the power is turned on.

–Flashes in green while the cooling fan runs after the power is turned off with the I / 1 key. The fan runs for about 90 seconds after the power is turned off.

The ON/STANDBY indicator flashes quickly for the first 60 seconds. During this time, you cannot light up the ON/STANDBY indicator with the I / 1 key.

For details on the LAMP/COVER and the TEMP/FAN indicators, see on page 44.

Location and Function of Controls 11 GB