Sony VPL-ES1 Connecting with a Monitor Equipment

Notes

•Set the aspect ratio using “Wide Mode” in the INPUT SETTING menu according to the input signal.

•When you connect the unit to 15k RGB or component video equipment, select video GBR or component with the “Input-A Signal Sel.” setting in the SET SETTING menu.

•Use the composite sync signal when you input the external sync signal from 15k RGB/component equipment.

Connecting with a Monitor Equipment

This section describes how to connect the projector to a monitor equipment. For more information, refer to the instruction manuals of the equipment you are connecting.

Left side

Monitor cable (not supplied)

HD D-sub 15-pin (male) ↔ HD D-sub 15-pin (male)

AUDIO VIDEO S VIDEO INPUT A

MONITOR OUT

to monitor input

Monitor equipment

GB 20 Connecting the Projector