Sony VPL-ES1 6 Turn the projector back over, 4 Insert the new lamp all the way in until, 5 Close the lamp cover and tighten the screws, Be sure to use the

4 Insert the new lamp all the way in untilit is securely in place. Tighten the screws. Fold the handle.

Notes

•Be careful not to touch the glass surface of the lamp.

•The power will not turn on if the lamp is not secured properly.

5 Close the lamp cover and tighten the screws.6 Turn the projector back over.

7 Connect the power cord. The ON/ STANDBY indicator around the =/1 key lights in red.

8 Press the following keys on the remote commander in the following order for less than five seconds each: RESET, b, B, ENTER.

Notes

•Be sure to use the LMP-E180 Projector Lamp for replacement. If you use lamps other than LMP-E180, the projector may cause a malfunction.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

•Do not put your hands into the lamp replacement spot, or not fall any liquid or object into it to avoid electrical shock or fire

Disposal the used lamp

The used lamp contains Mercury, dispose according to local, state or federal laws.

As the materials used in this lamp are similar to those of a fluorescent lamp, you should dispose of a used projector lamp in the same way as a fluorescent lamp.

GB 40 Maintenance