Sony VPL-ES1 3MENU key, Commander, 7INPUT key, 6FREEZE key, q; RESET key, 4D ZOOM +/– key, 9D KEYSTONE key, Remote Commander, To replace battery, 5Infrared transmitter

Remote Commander

1I / 1 (on/standby) key

2ENTER/arrow key (v/V/b/B)

Press the center of the key to use

ENTER.

3MENU key4D ZOOM +/– key

Enlarges the image at a desired location on the screen.

+: Pressing the + key once displays the icon. This icon indicates the point you want to enlarge. Use an arrow key (v/ V/b/B) to move the icon to the point to be enlarged. Press the + key repeatedly until the image is enlarged to your requirements.

–: Pressing the – key reduces an image that has been enlarged with the D ZOOM + key.

5Infrared transmitter6FREEZE key

Used to freeze the picture projected. To cancel the freeze function, press the key again.

7INPUT key8APA (Auto Pixel Alignment) key

Adjusts a picture clearest automatically while a signal is input from a computer.

Used when “Smart APA” in the SET SETTING menu is set to “Off.” Normally set to “On.”

9D KEYSTONE key

Used to adjust the tilt of the projector, or the trapezoidal distortion of the image manually. Each time you press this key, the Tilt menu and the V Keystone menu is displayed alternately. Use the arrow key (v/V/b/B) for the adjustment.

q; RESET key

Resets the value of an item back to its factory preset value or returns the enlarged image back to its original size. This key functions when the menu or a setting item is displayed on the screen.

Before using the RemoteCommander

Pull out the clear film from the lithium battery holder.

To replace battery

1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander.

GB 14 Location and Function of Controls