LCD / VGA ,

Projecting

INPUT

TILT

MENU

PUSH

ENTER

ON/STANDBY indicators

Remote control detector

Projecting and Up Setting

1

2

3

Plug the AC power cord into a wall outlet, then connect all equipment. The ON/STANDBY indicator lights in red and the projector goes into standby mode.

Press the I / 1 key.

The ON/STANDBY indicator lights in green and the Intelligent Auto-setup starts. The lens protector opens, and the powered tilt adjuster rises and stops at the previously adjusted position.

Turn on the equipment connected to the projector.

Depending on the type of your computer, for example a notebook, or an all-in- one LCD type, you may have to switch the computer to output to the projector

by pressing certain keys (e.g., / , etc.), or by changing your computer’s settings.

Projecting 23 GB