F7 or Fx

Fn

Fx:“x” indicate an optional numerical value. The Fx key varies depending on a computer’s makers.

4 Press the INPUT key to select the input source.
To input from

Press INPUT to display

 

 

Computer connected to the INPUT A connector

INPUT A

 

 

Video equipment connected to the VIDEO input

VIDEO

connector

 

 

 

Video equipment connected to the S VIDEO input

S VIDEO

connector

 

 

 

Smart APA (Auto Pixel Alignment) adjusts the picture of the connected equipment so that it is projected clearly.

Notes

•If “Auto Input Search” is set to “On,” the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found.

For details, see “Auto Input Search” in the SET SETTING menu on page 35.

•The Smart APA is effective for the input signal from a computer only.

5 Adjust the position of the picture by pressing the TILT key.

To adjust the position of the picture using the Remote Commander, press the D KEYSTONE key on the Remote Commander to display the Tilt menu and adjust the tilt using the v/V/b/B keys.

For details on the TILT adjustment key, see “How to use the powered tilt adjuster” on page 12.

Note

6

7

When you adjust the powered tilt adjuster with the TILT key, the automatic keystone adjustment is performed at the same time. If you do not want to perform the automatic keystone adjustment, set the V Keystone menu to “Manual.” (See page 37)

Turn the zoom ring to adjust the size of the picture.Turn the focus ring to adjust the focus.

GB 24 Projecting