Chapter 4: Operation

4-1 Start-up

General Operation

The general operation of the Slide Gate/Auger blending system is as follows: once the system is properly installed and set up, the system will be ready for operation. Please see the Installation and Setup chapter in this manual for further information.

Once the Slide Gate/Auger blending system is powered on, the unit will display the recipe screen (the recipe format should be in “Quickset” recipe mode). By pressing the highlighted box next to the feeder number, the operator can enter a valid recipe or use a previously stored recipe from the recipe book.

1.The blender is started by turning system on or material dropping below level switch in mix chamber.

2.Metering gates are opened (or auger motors are turned on) to meter material into the weigh hopper in the programmed order.

3.Each component is weighed, then the batch is dumped into the mix chamber (provided the mixer “High level” switch is not covered).

4.The material is mixed in the mix chamber and flows into the processing machine.

5.The optional slide gate below the mixer may control the flow of material to the molding machine or extruder.

Quick Start Procedure

New Recipes

1.Calibrate the weigh hopper before running the blender. (This will improve inventory accuracy). See page 45 for calibration instructions.

2.Ensure that all ingredient supply hoppers to be used are filled with material. Virgin material should be loaded into hopper #1 and regrind into hopper #3.

Note: On some models, Hopper #3 is equipped with an oversized square gate to assist in the feeding of the regrind material.

3.Enter the recipe menu on the touch screen by turning on the pendant controller (It will automatically default to this screen), and enter the blend recipe desired following the steps listed below:

a.Touch the box (labeled 1-6) that shows the hopper you want to change.

b.Touch the “Touch Here to CHANGE” button.

c.Enter in the new value (0 to 999.99) and press the enter button (arrow).

d.Touch “Done.”

e.After you have entered the new values for all hoppers (1-6), then push the “Accept New Recipe” button. The recipe will be entered.

The blender monitors the operator’s entries and determines if the recipe is valid before accepting the new recipe. If there is an error (i.e. the recipe does not add up to 100% and the blender is in

882.00207.00

Chapter 4: Operation

45 of 102

Page 45 Page 47
Page 46
Image 46
Mitsubishi Electronics 882.00207.00 specifications Start-up, General Operation, Quick Start Procedure, New Recipes
Page 45 Page 47

882.00207.00 specifications

Mitsubishi Electronics has always been at the forefront of innovation in the field of electronics, and one of its significant products is the Mitsubishi Electronics 882.00207.00. This device is designed for enhanced performance and reliability, providing a range of features that cater to both industrial and consumer needs.

One of the main features of the Mitsubishi 882.00207.00 is its robust design, which ensures durability in demanding environments. The device is built to withstand harsh conditions, making it ideal for industrial applications where reliability is critical. Its rugged construction means that it can operate efficiently in extreme temperatures, humidity, and other challenging conditions.

In terms of technology, the Mitsubishi 882.00207.00 incorporates advanced electronic components that enhance its functionality. This includes state-of-the-art processing capabilities that allow for quick data processing and seamless operation. The device’s integration of cutting-edge technology ensures that it meets the performance demands of modern applications while providing energy efficiency.

Another notable characteristic is its user-friendly interface. The device is designed with ease of use in mind, allowing operators to interact with it effortlessly. This ensures that even those with minimal technical expertise can operate the device effectively. The clear display and intuitive controls make it accessible for a wide range of users, facilitating smoother operations in various settings.

The Mitsubishi 882.00207.00 is also equipped with multiple connectivity options. This enables it to integrate seamlessly with other devices and systems, facilitating enhanced communication and data transfer. Whether it’s connecting to existing networks or interfacing with new technologies, the device’s versatility ensures it can adapt to evolving technological landscapes.

Additionally, the device is backed by Mitsubishi's commitment to quality and customer support. Users can expect reliable service and assistance, ensuring that they can maximize the potential of their investment.

In conclusion, the Mitsubishi Electronics 882.00207.00 stands out in the electronics market for its durable construction, advanced technology, user-friendly design, and versatile connectivity options. This makes it an invaluable tool for both industrial applications and everyday consumer use, embodying the innovative spirit that Mitsubishi Electronics is known for.
Top Page Image Contents