Blender Controller Menu Structure
“Recipe” Page” (Start)
¾Change Recipe Values by touching the number you wish to change
¾Touch “Accept New Recipe” button after you’ve made the desired changes
¾Start or stop the blender by touching the “Push to Start” or “Stop” button
¾Access “Recipe Book” Page
¾Access “Clean Out” Page
¾Access “Inventory Page”
¾Access “Setup” Page
“Recipe Book” Page
¾Save the running recipe to the book
¾Delete a stored recipe
¾Load a stored recipe
¾Erase all stored recipes
¾Modify the product ID for a stored recipe
¾Return to the “Recipe” page
“Clean Out” Page
¾Empty the blender hopper(s)
¾Manually Operate the mixer, weigh hopper dump gate, and the slide gate below the mixer
¾View and test all inputs and outputs on the blender
¾Return to the “Recipe” Page
“Inventory” Page
¾View the accumulated inventories
¾View batch time
¾View blender’s maximum capacity
¾View the average process rate
¾Return to the “Recipe”
Recipe Format
¾Percentage, Parts, or Quick Set
¾Batch Size
¾Inventory Shutdown
¾“Batch ready” mode
¾“Auto start” mode
Report Setup
¾Blender Number
¾“Auto clear” option
¾“Auto interval” setup
¾Auto start time
Calibration
¾Scale Calibration
¾Direct Scale Readout
¾Feeder Calibration
Mixer and Dump Setup
¾Mixing Time
¾Remix Time
¾Dump Time
¾Dump Delay
¾Dump Cycles
¾Mixer Dump Time
¾Timed/Continuous Mixing Option
F940 “Config”
¾View software version
¾Access F940 “Config” setup to modify time settings
Units
“Setup” Page
¾ Login from the inventory page by pressing “Login” and entering in your password. Then access setup by touching the
882.00207.00 | Chapter 3: Installation |
¾Blender data units (lbs. or kgs.)
¾Target vs. actual data units (lbs. or kgs.)
Alarm Log
¾View and clear the alarm log
Alarm Setup
¾“Stop/Continue” when out of material
¾“Alarm/No Alarm” when out of material
¾“Alarm Silence” delay
User Interface Lock
¾Lock the user interface to prevent others from making changes or viewing your blender. Be sure to logout after locking.
