Location and Function of Controls

qs Adjuster

Use the adjusters to keep the projector level if it is installed on an uneven surface.

Adjust the height so that the projector becomes level. The projector is raised by turning the adjusters clockwise, or it is lowered by turning them counterclockwise.

qd Air filter

To remove the air filter, pull it out horizontally with this part.

For details, see “Cleaning the Air Filter” on page 31 (GB).

Note

When replacing the lamp, also clean the filter to

ensure optimal performance.

Control panel

1 2

3

 

TEMP/FAN

LAMP/COVER

 

LENS CONTROL

INPUT

POWER SAVING ON/STANDBY

MENU

RESET

 

 

ENTER

APA

 

98 7 6 5 4

1LENS CONTROL key

Enters the focus, zoom or shift adjustment mode. Next adjust them using the arrow keys. Each time you press the key, the mode changes to LENS FOCUS, LENS ZOOM and LENS SHIFT in order. The mode currently selected is displayed on the screen.

LENS FOCUS: Enters the focus adjustment mode. Next adjust the focus using the arrow keys. Press the M or , key to focus on a picture further back, and the m or < key to focus on a forward picture. You cannot select LENS FOCUS when you attach the optional lens.

LENS ZOOM: Enters the zoom adjustment mode. Next adjust the picture size using the arrow keys. Press the Mor ,key to enlarge the picture size, and the m or <key to reduce it. You cannot select LENS ZOOM when you attach the optional lens.

LENS SHIFT: Enters the shift adjustment mode. Next adjust the vertical position of the picture using the arrow keys. Press the Mor ,key to move the picture upward, and the mor < key to move it downward.

2Arrow keys (M/m/</,)

Used to adjust focus, zoom and shift, or to move the cursor or make various adjustments in the menu.

10 (GB)