
The PICTURE CTRL Menu / The INPUT SETTING Menu
COLOR SYS (System)
The INPUT SETTING Menu
Selects the color system of the input signal. | The INPUT SETTING menu is used to adjust the |
AUTO: Automatically selects one of the following | input signal. |
signals: NTSC3.58, PAL, SECAM, NTSC4.43. | Unadjustable items depending on the input signal are |
not displayed in the menu. |
following signals: |
|
|
| ||||
Normally, set to AUTO. |
|
|
| When the video signal is input |
| ||
If the picture is distorted or colorless, select the color | INPUT SETTING |
| VIDEO | ||||
system according to the input signal. |
|
|
|
| |||
|
| SHIFT | H: 200 | V: 30 | |||
|
|
|
|
| ASPECT: | 16:9 |
|
DDE (Dynamic Detail Enhancer) |
|
| NO.01 | Memory No. | |||
|
| VIDEO/60 |
| ||||
|
|
|
|
|
|
| |
Selects the reproduction format of the input video |
|
| Signal type | ||||
signals according to the video sources. |
|
|
|
| |||
FILM: Normally, set to this position. Reproduces |
|
|
| ||||
the |
|
|
| ||||
picture movement. |
|
|
|
|
|
| |
When the video signal with a format other than | When the RGB signal is input |
| |||||
the | INPUT SETTING |
| |||||
automatically selected. |
|
|
| ||||
|
|
|
| ||||
|
| DOT PHASE: | 0 |
| |||
PROGRESSIVE: Converts an interlace format |
| ||||||
SIZE H: | 1056 |
| |||||
video signal to a progressive format. |
| SHIFT | H: 200 | V: 30 | |||
OFF: Plays back the video signal in an interlace | SCAN CONV: ON |
| |||||
|
|
| |||||
format without converting. |
|
|
| NO.17 | Memory No. | ||
|
|
|
|
|
| 800x600 |
|
Input signals and adjustable/setting items |
|
| Signal type | ||||
Item |
| Input signal |
|
|
|
| |
| Video or | Component | Video GBR | RGB1) | Operation |
|
|
| S video (Y/C) |
|
|
|
|
| |
CONTRAST |
|
|
|
| 1. Select an item |
|
|
BRIGHT |
|
|
|
| Use the M or m key to select the item, then press the | ||
COLOR | (except for B & W) |
|
| – | , or ENTER key. |
|
|
|
|
|
| 2. Adjust an item |
|
| |
HUE |
|
|
| – |
|
| |
(NTSC3.58/ |
|
| • When changing the adjustment level: | ||||
|
|
|
| ||||
| 4.43 only) |
|
|
| To increase the number, press the M or , key. | ||
SHARP |
|
|
| – | |||
|
|
| To decrease the number, press the m or < key. | ||||
RGB | – | – | – |
| |||
| Press the ENTER key to restore the original screen. | ||||||
ENHANCER |
|
|
|
| |||
|
|
|
|
|
|
| |
D. PICTURE |
|
| (480/60i, | – | • When changing the setting: |
| |
|
| (480/60i, |
| Press the M or m key to change the setting. | |||
|
| 575/50i) | 575/50i) |
| |||
|
|
| Press the ENTER or < key to restore the original | ||||
GAMMA | – | – |
|
| |||
(480/60i, |
| screen. |
|
| |||
MODE |
|
|
|
|
| ||
|
|
| 575/50i) |
|
|
|
|
COLOR |
|
|
|
|
|
|
|
TEMP |
|
|
|
| DOT PHASE |
|
|
COLOR |
| – | – | – |
|
| |
|
|
|
| ||||
SYS |
|
|
|
| Adjusts the dot phase of the LCD panel and the signal | ||
DDE |
| (480/60i, | (480/60i, | – | input from the INPUT A/B (analog signal only) | ||
|
|
| connector. Adjust the picture further for finer picture | ||||
|
| 575/50i) | 575/50i) |
|
: Adjustable/can be set | after the picture is adjusted with pressing the APA | |
key. Adjust the picture to where it looks clearest. | ||
|
.........................................................................................................................................................................................................
1) The RGB signals of a computer. INPUT C is adjustable for the same items as that of the RGB (digital) signals. | 23 (GB) |