The INPUT SETTING Menu

 

SIZE H

Input signals and adjustable/setting items

Adjusts the horizontal size of picture input from the INPUT A/B (analog signal only) connector.

The higher the setting, the larger the horizontal size of the picture.

The lower the setting, the smaller the horizontal size of the picture. Adjust the setting according to the dots of the input signal.

For details on the suitable value for the preset signals, see page 25 (GB).

SHIFT

Adjusts the position of the picture input from the INPUT A/B (analog signal only) connectors or VIDEO IN jacks.

H adjusts the horizontal position of the picture. V adjusts the vertical position of the picture.

As the setting for H increases, the picture moves to the right, and as the setting decreases, the picture moves to the left.

As the setting for V increases, the picture moves up, and as the setting decreases, the picture moves down. Use the < or , key to adjust the horizontal position and the M or m key for the vertical position.

ASPECT

Sets the aspect ratio of the picture.

When inputting 16:9 (squeezed) signal from equipment such as a DVD player, set to 16:9.

4:3 : When the picture with ratio 4:3 is input.

16:9 : When the picture with ratio 16:9 (squeezed) is input.

SCAN CONV (Scan converter)

Converts the signal to display the picture according to the screen size.

ON: Displays the picture according to the screen size. The picture will lose some clarity.

OFF: Displays the picture while matching one pixel of input picture element to that of the LCD. The picture will be clear but the picture size will be smaller.

Note

This item is displayed only when the computer signal (except for the XGA, SXGA and UXGA signals) is input.

Item

 

Input signal

 

 

Video or

Component

Video GBR

RGB1)

 

S video (Y/C)

 

 

 

DOT

 

 

 

PHASE

 

(HDTV only)

(HDTV only)

(Analog

 

 

 

 

only)

SIZE H

(HDTV only)

(HDTV only)

(Analog

 

 

 

 

 

 

only)

SHIFT

 

 

 

 

 

 

 

 

(Analog

 

 

 

 

only)

ASPECT

 

 

 

 

 

(480/60i,575/

(480/60i,575/

 

 

 

50i,480/60p,

50i,480/60p,

 

 

 

575/50p)

575/50p)

 

SCAN

 

CONV

 

 

 

(lower

 

 

 

 

than

 

 

 

 

SVGA

 

 

 

 

only)

: Adjustable/can be set

– : Not adjustable/can not be set

About the preset memory No.

This projector has 44 kinds of preset data for input signals (the preset memory). The memory number of the current input signal and the signal type are displayed when the preset signal is input. This projector automatically detects the signal type. When the signal is registered to the preset memory, a suitable picture is displayed on the screen according to the signal type. You can adjust the picture through the INPUT SETTING menu.

This projector also has 20 kinds of user memories for each INPUT-A/B (analog signal only). When an unpreset signal is input for the first time, memory number is displayed as 0. If the input signal is adjusted in the INPUT SETTING menu, the setting via INPUT-A/B (analog signal only) is stored. When more than 20 user memories are registered for each INPUT-A/B (analog signal only), the newest memory is automatically stored over the oldest one.

.........................................................................................................................................................................................................

1) The RGB signals of a computer. INPUT C is adjustable for the same items as that of the RGB (digital) signals.

24 (GB)