The SET SETTING Menu / The INSTALL SETTING Menu

STATUS (on-screen display)

Sets up the on-screen display.

ON: Shows all of the on-screen displays.

OFF: Turns off the on-screen displays except for the

menus, a message when turning off the power, and warning messages.

For details on the warning messages, see page 33 (GB).

IR RECEIVER

Selects the remote control detectors on the front and rear of the projector.

FRONT & REAR: Activates both the front and rear detectors.

FRONT: Activates the front detector only.

REAR: Activates the rear detector only.

INPUT-B TERM.

Set to PC ANALOG when the RGB signal input to the INPUT B RGB (DVI) connector is analog, and to PC DIGITAL when the input RGB signal is digital.

INPUT-A

Selects the computer, component or video GBR (15k RGB, DTV, HDTV) signal input from the INPUT A connector.

Note

If the setting is not correct, “Please check INPUT-A setting.” appears on the screen and the color of the picture becomes strange or the picture is not displayed.

AUTO INPUT SEL

When set to ON, the projector detects input signals in the following order: INPUT-A/INPUT-B/INPUT-C/ VIDEO/S-VIDEO. It indicates the input channel when the power is turned on or the INPUT key is pressed.

LANGUAGE

Selects the language used in the menu and on-screen displays.

Available languages are: English, French, German, Italian, Spanish, Japanese, Chinese, Portuguese and Korean.

POWER SAVING

When set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes.

The INSTALL SETTING Menu

The INSTALL SETTING menu is used for changing the settings of the projector.

INSTALL SETTING

INPUT-A

 

DIGIT KEYSTONE: 0

INSTALLATION:

CEILING-FRONT

LENS CONTROL: ON

MENU POSITION: CENTER

MENU COLOR:

STANDARD

MENU BACKGRND:

STANDARD

INPUT-C FUNC.:

ON

LAMP MODE: STANDARD

DIRECT PWR ON: OFF

LAMP TIMER:

234h

Operation

1. Select an item

Use the M or m key to select the item, then press the

,or ENTER key.

2.Adjust an item

•When changing the adjustment level:

To increase the number, press the M or , key. To decrease the number, press the m or < key. Press the ENTER key to restore the original screen.

•When changing the setting:

Press the M or m key to change the setting.

Press the ENTER or < key to restore the original screen.

26 (GB)