Connecting

Connecting with a 15k RGB/ Component Equipment

This section describes how to connect the projector with a 15k RGB/component equipment.

Also refer to the instruction manuals of the equipment to be connected.

Front of the projector

 

 

 

 

 

 

 

TRIG

PLUG IN POWER

 

 

 

INPUT B

 

 

 

CONTROLS

 

 

 

INPUT C

 

 

 

 

 

 

 

RGB (DVI)

VIDEO IN

 

 

 

 

 

 

ETHER

 

 

 

INPUT A

 

 

 

 

 

 

 

 

 

 

 

 

 

RS-232C

R/R-Y/PR

G/Y

B/B-Y/PBSYNC/HD

VD

 

S VIDEO

VIDEO

 

 

 

 

MONITOR OUT

VIDEO OUT

 

 

 

Monitor cable (not supplied)

to RGB/component output

15k RGB/component equipment

Notes

•Set the aspect ratio using ASPECT in the INPUT SETTING menu according to the input signal.

For details, see page 24 (GB).

•Select the input signal using INPUT-A in the SET SETTING menu.

For details, see page 26 (GB).

•Use the composite sync signal when you input the external sync signal from 15k RGB/component equipment.

Connecting to a HDTV 1035/60i

Since the screen ratio of a high definition image is 16:9 and 576 lines are displayed in the vertical direction, the image displayed is not a high- definition image.

Connecting to LAN

This projector is compatible with networking. Installing a wireless LAN PC card or using the ETHER connector enables you to connect the projector to a wireless or wired LAN. You can also install a PC memory card.

This section describes how to connect to LAN and how to install a PC card.

Whenever you connect the projector to LAN, set INPUT C FUNC. in the INSTALL SETTING menu to ON.

For details, see page 27 (GB).

Installing a PC card

When you use a wireless LAN PC card or memory card, insert the card into the INPUT C PC CARD slot.

Open the lid of the slot, then insert the PC card to the INPUT C PC CARD slot

Insert the card with the arrow mark facing toward the slot.

PC card

The eject button pops out when inserting.

To remove the PC card from the slot, press the eject button.

16 (GB)